КАК МЫ МОЖЕМ ВАМ ПОМОЧЬ?

Do not use chemicals, only soft cloths to avoid scratching or damaging the paintwork.

IRSAP Advises: https://www.youtube.com/watch?v=6KBtByQH6JU

First you have to vent the radiator. There is a dedicated section on https://www.irsap.com/en/support-en/irsap-consiglia-3/2096-how-to-vent-radiators.

Radiators per se have no emissions after they are switched on. However, especially in the new ignition season,the dust that accumulates between one tube and another during downtimes can spread throughout the room by convection. The solution is to dust them with a slightly damp cloth, preferably a microfibre cloth or a duster. There are specific dusters on the market whose shape makes this operation much easier.

Radiators usually do not require any special cleaning. It is sufficient to dust them periodically with a slightly damp cloth, preferably using microfiber one or a duster. There are specific dusters on the market whose shape makes this operation much easier.

You can contact your dealer.

Estimating the heating requirements of a room or building is a complicated calculation that must take into account many specific factors and must necessarily be done by a qualified technician. However, there is a calculator on the Irsap website that can provide an indicative estimate of the watts needed to heat a room.

Radiators usually do not require any special cleaning. It is sufficient to dust them periodically with a slightly damp cloth, preferably using microfiber one or a duster. There are specific dusters on the market whose shape makes this operation much easier.

Most radiators are available in the full range of Irsap colours. However, some models may have restrictions. To find out which colour is available for your radiator, you can view the colours compatible with your radiator on our website at the product page. Alternatively, you can view the "physical" colour chart in our showrooms and see for yourself the rendering of each finish.

Не нашли то, что искали?