HOW CAN WE HELP YOU?

The radiator does not heat evenly

If your radiator does not have an even temperature across its entire surface, or the pipes are cold on one side, or you hear a noise when they are turned on, there is probably an air accumulation inside that, like a bubble, prevents the hot water from circulating properly, causing the operating pressure of the plumbing system to drop and sometimes the boiler itself to block. To eliminate this air bubble, it is therefore necessary to vent the radiators. The operation is very simple and quick to perform on the Irsap website. At this link, https://www.irsap.com/en/support-en/irsap-consiglia-3/2096-how-to-vent-radiators, you will find a practical guide on how to vent radiators.

You can contact your dealer or our after-sales department.

Estimating the heating requirements of a room or building is a complicated calculation that must take into account many specific factors and must necessarily be done by a qualified technician. However, there is a calculator on the Irsap website that can provide an indicative estimate of the watts needed to heat a room.

Radiators usually do not require any special cleaning. It is sufficient to dust them periodically with a slightly damp cloth, preferably using microfiber one or a duster. There are specific dusters on the market whose shape makes this operation much easier.

Most radiators are available in the full range of Irsap colours. However, some models may have restrictions. To find out which colour is available for your radiator, you can view the colours compatible with your radiator on our website at the product page. Alternatively, you can view the "physical" colour chart in our showrooms and see for yourself the rendering of each finish.

Haven't found what you were looking for?